DIY Wardrobe for People Who are Tight on Budget

1,087 Views

Riidekapid or English Wardrobes can be really expensive, especially if they are store-bought. People oftentimes have a problem looking for the cheapest wardrobe closet that can meet their standards in terms of capacity and size. However, looking for the best one can take too much time and effort. So, why not build one instead of buying one?

In this article, we are going to give you an idea on how you can build your own wardrobe closet and accessorize it without spending too much cash.

#1 Decide on the Size of Your Closet

Before buying the materials, make sure that you measure the size of your closet. The size would depend on your available space.  In order to measure the size of the closet, get a measuring tape and decide which part of the room you wish to put your closet. Make sure to get the length, width, and height of your desired closet. Also, make a small allowance in the measurements.

#2 Choose a Design

Once you have the measurements, you can now create or choose a design of your closet. If you wish to make one on your own. Draft them down on a piece of paper. But if you are having a hard time conceptualizing one, you can go to sites like V-DISAIN. This website has a variety of designs that you can choose from. Once you have decided on the design, you can now start buying the materials for your customized wardrobe closet.

This way, you will be able to tell how many boards that you will be using when making your wardrobe closet. If you are unsure, you can ask the advice of a professional.

#3 Buy the Materials

Raw materials are easily available in hardware stores. You can ask their assistance on choosing the best board for your wardrobe closet. There are several types of woods that can be used as wardrobe closets. There are also pre-cut boards available in the market. You can use this board instead of buying the uncut ones. This way, you won’t have to cut them into pieces yourself.

#4 Build Your Closet

Start with the frame. The first thing that you should do is to attach the frame. The frame is composed of the bottom and top supports and the side panels. Drill holes on each corner of the frame and tighten them with a screwdriver. After that, get the middle support and place it on the desired position.

Then, add the back support. When making the dimensions of the back support, make sure to consult with a professional. In this way, you will be guided on the size of the back support. Once the measurement of  back support is decided, you can now attach it to the frame.

Finally, customize your closet. Once you have decided the whole frame is finished, you can now customize your closet according to your needs. You can drill a copper pipe on the upper part of your closet for your hanged cloth items. You can also add an extra partition to create small drawers and cubicles for your clothes.

Conclusion

There are so many ways on how you can build your wardrobe closet. You can also recycle unused materials like ladders, old pipes, wick basket, etc. Making your own wardrobe closet doesn’t have to cost much. You just need the right inspiration to recreate a cost-effective one.

Leave a Reply